The page could not be found

This page you are trying to reach doesn't seem to exist. This is probably a result of a bad or outdated link. We apologize for any inconvenience.

What you can do

  • Check the address for proper spelling. If it looks misspelled you can try to correct it.
  • Use the search function on this page or via the search page.
  • Try navigating from "Home" or any of the links in the navigation above.
  • View the sitemap to get an overview of this website.

47 hits

47 hits on helical coil.html in entire website

Motor coils

The Kanthal ... program includes a wide range of conductive wire (magnet wire) for motor coils.

How to form a coiled heating element

Are you curious to know how to make a coiled heating element, why nichrome is non-magnetic, or why the same heating wire can have different color? Welcome ... form a 9.5 Kanthal® APM wire element, what to think about when forming a coiled heating element, and how to know the difference between Kanthal® (FeCrAl)

Globar® SG and SR

pass through the walls of the furnace. Machining the tube with one or more helical cuts creates the hot zone. This increases the resistance, by extending the ... w, to form a low resistance contact. Globar® SR elements have a 2-start helical cut, and are supplied complete with a terminal assembly at one end. Material

Kanthal® DT

close wound coils. The grade is characterized by a highly adherent and dense surface oxide that prevents short circuiting between adjacent coil turns. A typical ... lighter coils in automobiles. A ferritic iron-chromium-aluminium (FeCrAl) alloy particularly suitable for applications using close wound coils.

Light gauge diffusion cassettes

light gauge wire that are formed into sinusoidal patterns or spring-type coils. Light gauge refers to the use of smaller diameter wire in the construction ... consists of: Half-shell ceramic molds with embedded wire sinuation or spring coils. Ceramic mold backed with dry blanket fiber for designed insulation value

Moduthal® heating modules

ensures accurate positioning of the coils and eliminates the distortion or other problems connected to the coventional open coil elements in grooves or on tubes ... °C °F Fully embedded (coil) 1100 2010 1100 2010 1100 2010 Semi embedded (coil) 1150 2100 1150 2100 1150 2100 Free radiating (coil) 1200 2190 1200 2190 1150

1350 Aluminum

Aluminum has a purity of 99-99.5%. 1350 Al is widely used for disk drive coils, development of tethers with heat-resistant enamels and high-strength bond ... Aluminum has a purity of 99-99.5%. 1350 Al is widely used for disk drive coils, development of tethers with heat-resistant enamels and high-strength bond

Supported element type

ceramic elements Quartz tube heaters Bead insulated coils String elements The wire, normally in coil form, is situated on the surface, in a groove or a ... the most suitable materials. In order to avoid deformations on horizontal coils, the wire temperature should not exceed the values given in the diagram on

Heating elements for home appliances

for example: Embedded elements Cartridge elements / Powder filled elements Coils in grooves Elements in ceramics Heating cables / Rope heaters Metal sheathed ... elements Suspended elements Bead insulated coils Coils immersed in water Open mica elements String elements Suspended coils / Suspended straight wires Zig-zag